: Route the retrofit wiring harness from the front bumper through the firewall to the interior control modules [1.2, 1.4].
The filename is associated with a detailed DIY guide for retrofitting Front Park Distance Control (PDC) on BMW F30 (3 Series) vehicles. This specific image likely showcases the front PDC retrofit installation kit or the wiring components required for the upgrade [1.3]. BMW Front PDC Retrofit Guide Summary 1669-set-1x.jpg
: Replace the button unit in the center console. Use a tool to press the plastic springs to release the old unit and connect the new control cable [1.2]. : Route the retrofit wiring harness from the
: Disconnect the car battery before starting any electrical work [1.2]. Installation Steps : BMW Front PDC Retrofit Guide Summary : Replace
For the full step-by-step walkthrough and specific wiring diagrams, you can refer to the Front Park Distance Control Retrofit DIY on the Bimmerpost forums .
Bumper bracket repair kit (Part #51117324343) for sensor holders [1.3].
: After physical installation, the vehicle usually requires VO (Vehicle Order) coding to recognize the new front sensors [1.4].
