Select and connect the Switch to your PC via USB.
Navigate to (or your USB drive if connected). Select the .nsp file and press Install . 3. Important Considerations DEATHDOOR-NSwTcH-[BASE]-NSP-Ziperto.rar
To use the file, you must first extract the content from the archive and then install the resulting .nsp file onto a modded Nintendo Switch. 1. Extraction Steps Select and connect the Switch to your PC via USB
On your PC, open the new "Switch" drive, navigate to the folder, and drag your .nsp file into it. Goldleaf (SD Card Method) : Copy the .nsp file to an "NSPs" folder on your SD card. Launch Goldleaf on your Switch. Extraction Steps On your PC, open the new
: If installing from an SD card, ensure it is formatted to exFAT if the file is over 4GB, or use a USB installation method to avoid FAT32 limitations.
: If you have multiple parts (e.g., .part1.rar , .part2.rar ), place them all in the same folder. Right-click only the first part to extract the complete game. 2. Installation Methods
Navigate to , select your file, and choose Install . Tinfoil : Open Tinfoil on your Switch.