Slide the table assembly onto the rod and secure it with the secondary socket head screw.
: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly : Delta 52 611 Sander Manual
Maintain a minimum clearance of between the table and the sanding belt for safety. Slide the table assembly onto the rod and
: Use a 3-wire grounded extension cord. Ensure the gauge is heavy enough to prevent voltage drops and overheating (refer to the Delta Abrasive Belt Manual for specific gauge charts). 3. Operational Safety 6" Abrasive Belt Finishing Machine Delta 52 611 Sander Manual
Insert the support rod into the base and tighten the socket head screw.
: Tilts 45° out (away from belt) and 20° in (toward belt).
