V56 PB801 (Commonly used in universal LCD/LED TV controller boards) Backlight Voltage: 66V–94V Current/Power: 600mA / 45W Native Resolution: 1366 x 768

This is a "General" firmware, meaning it usually supports standard remote controls. If your remote doesn't work after flashing, you may need to use the physical buttons on the TV to access the menu and adjust settings.

Use WinRAR or 7-Zip to extract the downloaded .rar archive. You should see a file named SI6M_56_E.bin (or similar).

Place the extracted .bin file directly into the root directory of the USB drive. Do not put it inside a folder. Flashing Process: Turn off the TV/Board power. Insert the USB drive into the TV's USB port. Plug in the power cord or turn the power on.

Ensure your LVDS cable and panel voltage (3.3V, 5V, or 12V) are correctly set via the jumper on the board before powering on, or you may damage the screen.

.rar (Requires extraction to get the .bin file) Update Method: USB Interface How to Install the Firmware

The indicator light (LED) should start blinking rapidly, signaling the update is in progress.