Instruktsiia Qstar A7 Drive -

Place the suction cup mount on the windshield, preferably behind the rear-view mirror to avoid blocking the driver's view.

Use the provided wire trim tools to hide the cable inside the car's interior trim (A-pillar).

The camera will start automatic loop recording once powered. A red dot often flashes on the screen indicating it is recording. instruktsiia qstar a7 drive

Dashcams are designed to work primarily while connected to car power.

Rotate the mount 360 degrees to get the best view of the road. 2. Operating Instructions Place the suction cup mount on the windshield,

Adjust sensitivity (Low/Medium/High) to trigger emergency recording.

If the camera detects a collision via G-Sensor, it will lock the current file to prevent it from being overwritten. 3. Key Settings Loop Recording: Set to 1, 3, or 5-minute segments. A red dot often flashes on the screen

Check that the Micro SD card is inserted and has been formatted, or check if the G-sensor has filled up the card with locked files.