Mastercam X2 Art Tutorial May 2026

If you are working on a real design, I can help you troubleshoot specific steps: Are your chains not closing?

He defined his Art Model Manager settings, creating a workspace that matched his 12x12 inch wood block.

Using the Art Create Shape tool, he selected the hawk’s silhouette. Mastercam X2 Art Tutorial

He used the Add Boss function to layer the Celtic knot over the hawk’s wing.

He selected a 3D Roughing toolpath with a 1/4" ball nose end mill. This would strip away the bulk of the wood, leaving a "stair-step" version of his art. If you are working on a real design,

The machine roared to life. For three hours, the shop was filled with the rhythmic shush-shush of the tiny bit dancing across the grain. When the vacuum cleared the dust, Elias didn't just see a computer program. He saw a legacy. The hawk looked ready to fly, every feather sharp and every knot perfectly over-and-under. Mastercam X2

For the fine detail, he chose an Art Finishing toolpath . He swapped the tool for a tiny 1/16" tapered carver. He used the Add Boss function to layer

He chose a "Circular" cross-section. Suddenly, the flat lines on the screen rose like dough in an oven, forming a soft, organic 3D relief. Phase 2: Adding the Texture