Advanced configuration like changing the operating frequency or CAP codes (RIC addresses) cannot be done through the device buttons.
: A physical jumper (BR1) inside the unit may need to be opened to enable flash programming, while closing it returns the device to normal operation. Motorola Scriptor Lx2 Programming
: Parameters like RIC addresses and alert keywords are stored in the non-volatile memory circuits (IS3 and IS4). : Select from eight different alert tones if
: Select from eight different alert tones if the pager is in audible mode. Hardware Required : : Set the daily alarm
: The specific software depends on the pager's protocol: Scriptor POCSAG : Uses software version R01.06.03 (APC 141). Scriptor FLEX : Uses software version R01.00.02 (APC 17A). Hardware Required :
: Set the daily alarm and the system clock directly through the User Interface .
: The cradle connects to a computer (typically via a serial or USB-to-serial adapter) to allow the software to "read" and "write" to the pager's non-volatile memory. 3. Repair and Maintenance Mode