You should hear the throttle motor move during those 10 seconds. 3. Idle Air Volume Learning (IAVL)
Ensures the ECM knows the exact "stop" point of the throttle butterfly. Turn ignition ON. Action: Turn ignition OFF and wait at least 10 seconds.
The 2010 "refreshed" Qashqai introduced several mechanical and software updates aimed at refinement. Specification 1.6L Petrol (117bhp), 1.5L dCi (110bhp), 2.0L Petrol/Diesel Transmission Nissan Qashqai 2010 1.46 Adaptation
If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning
This step helps the ECM learn the voltage signal when the pedal is fully released. Engine off, ignition ON for at least 2 seconds. Action: Turn ignition OFF and wait at least 10 seconds. You should hear the throttle motor move during
CVT jerking, timing chain stretch, and faulty window regulators ⚠️ Important Maintenance Note
This is the most critical "adaptation." It must be done when the engine is warm (70°C–100°C) and all electrical loads (A/C, lights) are OFF. Turn ignition ON
Wait 7 seconds. Fully depress pedal for ~20 seconds until the stops blinking and stays ON.
