Ppg244_s02_082.jpg May 2026

: Locate the Draft icon in your Features toolbar or navigate through the menu (e.g., Insert > Features > Draft in SolidWorks). Define the Type of Draft :

To draft a solid feature for a specific part or drawing (like ppg244_s02_082.jpg ), you typically use the tool found in the features toolbar of most CAD software such as SolidWorks or Solid Edge . This feature adds an angle to selected faces of a model, which is essential for parts intended for injection molding or casting to ensure they can be removed from the mold. Standard Workflow for Creating a Draft Feature ppg244_s02_082.jpg

: Input the required degree of taper (commonly 1∘1 raised to the composed with power 3∘3 raised to the composed with power for basic plastic parts). : Locate the Draft icon in your Features

: You select a line (usually on the edge where the mold halves meet) that determines w Standard Workflow for Creating a Draft Feature :

: Choose the specific faces you want to taper. Use the Detailed Preview option if available to visualize the direction of the draft. Confirm : Click OK to apply the solid feature to your model. Troubleshooting Complex Geometry

: A more complex option often used for tapered split lines.