Shema Jelektrochajnika Termosa | VERIFIED • 2024 |

When turned on, electricity flows through the thermal fuse and the closed contacts of the main thermostat to the primary high-power TÉN.

If the device has no power at all, the thermal fuse ( ) is often the first thing to check with a multimeter.

Most thermopots use two separate heating elements or a single element with two circuits: Main Element ( EK1cap E cap K 1 ): High power (700–900W) for the initial boiling phase. Keep-Warm Element ( EK2cap E cap K 2 shema jelektrochajnika termosa

) that permanently breaks the circuit if the thermostats fail and the pot overheats dry.

Below is a breakdown of the typical electrical scheme and how these components function together. 1. Key Components of the Electrical Scheme When turned on, electricity flows through the thermal

Ремонт Термопота TOSHIBA HOT POT PLK-25VETR - Drive2

Once boiling, the main thermostat opens its contacts. The circuit then redirects power through the secondary "Keep-Warm" TÉN or a control relay. Keep-Warm Element ( EK2cap E cap K 2

): A bimetallic switch that cuts power to the boiling element once is reached. Keep-Warm Thermostat/Sensor ( RTcap R cap T