U76ezip – Extended

Reinstall the solenoids and plates using the original eight bolts, then re-secure the remaining components.

This guide summarizes the core steps for installing the repair kit to fix common issues like "flaring," slipping, or gear ratio codes. U76Ezip

Remove the solenoid brackets, solenoids, and the small/large cover plates. 2. Inspecting Critical Wear Areas Reinstall the solenoids and plates using the original

While the valve body is in the transmission, remove the 11 indicated bolts and the internal wire harness assembly. Remove the counter gear/turbine speed sensor and disconnect

After installation, you must perform a TCM Initialization/Memory Reset to allow the transmission computer to adapt to the new, corrected hydraulic pressures.

Remove the counter gear/turbine speed sensor and disconnect the case connector from all seven solenoids.

Before installing the kit, it is recommended to perform on key locations to ensure the valve body is salvageable. Common wear areas include: