N_031.mp4 May 2026

: Ensure the hoist limit switch stops the winch before the hook hits the boom tip.

: Measure the signal between Pin 2 (signal) and Pin 1 (ground). Use a voltmeter at test point MP4 on the main board. 2. Angle Sensor Adjustment n_031.mp4

The length sensor measures boom extension via a potentiometer in the cable reel. : Ensure the hoist limit switch stops the

This guide covers the assembly and adjustment of core components found in the system's technical manuals. 1. Cable Reel & Length Sensor n_031.mp4